Below are photo instructions for Izzo Duetto Thermal Probe Replacement. Before doing this we recommend unplugging your machine and allowing it fully cool off. Tools required:
- #2 Phillips screwdriver 10mm wrench
- snips (for zip ties)
- 17mm wrench
- Teflon tape
Start by removing the top plate (#2 Phillips driver) and side/back panels (10mm wrench). See Knowledge Base Article here for panel removal.
Disconnect thermal probe wire harness, you may need to remove a couple zip-ties first.
Using a 17mm wrench, remove thermal probe.
Install new thermal probe using a thread sealer such as teflon tape. Reassemble and test machine.