Izzo Duetto - Steam Temperature Probe Replacement

Below are photo instructions for Izzo Duetto Thermal Probe Replacement. Before doing this we recommend unplugging your machine and allowing it fully cool off. Tools required:

• #2 Phillips screwdriver 10mm wrench
• snips (for zip ties)
• 17mm wrench
• Teflon tape

 Start by removing the top plate (#2 Phillips driver) and side/back panels (10mm wrench). See Knowledge Base Article here for panel removal.

 Disconnect thermal probe wire harness, you may need to remove a couple zip-ties first. 

Using a 17mm wrench, remove thermal probe.

 Install new thermal probe using a thread sealer such as teflon tape. Reassemble and test machine.