Quick Mill LUCCA M58 - PID Removal

Below are photo instructions for replacing an M58 PID. Before doing this unplug your machine and let it fully cool off. In order to access the PID you will first need to remove the panels from the machine(we have a walk-through here). Tools required:

• small flat head screwdriver
• adjustable wrench

When reinstalling PID it is crucial to connect the right wires to the right seats, the photo below describes which wires seat in the correct spots. Note: On some models the machine uses a yellow wire(see photos above) and others a brown wire(in the photo below).

When installing a new PID it can be helpful to glue in the plug that seats to the vertical part of the board, though not necessary.