Below you will find instructions for cleaning the fill solenoid in the Quick Mill QM67.
Tools needed:
- Flathead screwdriver
- 17mm wrench
1. Remove the panels of the machine by following along with our guide here: QM67 Panel Removal
2. Remove the silver clip with the flathead screwdriver by pushing it off.
3. Use the 17mm wrench to remove the silver post out of the golden body of the solenoid.
4. Check that the seat is clear of any debris or scale buildup, and ensure the inside of the fitting is also clear.
Comments
0 comments
Please sign in to leave a comment.