La Spaziale LUCCA A53 / A53 Mini - Drying Inside of Temp Probe

Below you will find instructions for drying out the inside of the steam boiler temp probe on the A53 and A53 Mini.

Tools Needed:

• Pliers
• Compressed air

1. Remove the top panel of the machine by removing the single screw in the top panel and lifting it off.

2. Pull the protective cover off of the temp probe, you may need to gently use pliers to pull the casing up, but be careful not to damage the wires.

3. Use compressed air to blow down into the temp probe to help dry it out.