Below you will find instructions for checking and cleaning the fill solenoid on the A53 Mini.
Tools Needed:
- Phillips Screwdriver
- Adjustable Wrench
1. Remove the panels of the machine by following along with our guide: A53 Panel Removal
2. Remove the nut holding the solenoid body in place.
3. Remove the solenoid shaft. You may need to use a second wrench to counter-torque on the valve so that the bracket does not bend.
4. Clean the green rubber seat and ensure there is no scale buildup inside the solenoid housing.
Comments
0 comments
Please sign in to leave a comment.