Below you will find instructions for installing the updated chute in the Eureka Atom Espresso Grinder.
- 2.5mm Allen Wrench
- 3mm Allen Wrench
1. Remove the hopper from the machine and clear out any beans from the throat of the grinder.
2. Remove the top plate of the grinder with the 3 screws circled here.
3. Remove the control panel of the grinder with the 2 screws circled here.
4. Remove the old chute from the grinder by taking out the 2 screws pointed out here.
5. Install the new chute with the 2 screws pointed out here.