Profitec Pro 700 - Replacing Coffee Boiler Temperature Probe

Below you will find instructions for replacing the temperature probe in the coffee boiler of the Pro 700.

Tools Needed:

• 2.5 mm Allen Wrench
• 14 mm Wrench

1. Remove the top panel of the machine by following along with step 1 in our Pro 700 Panel Removal article.

2. Unplug the wire connected to the temperature probe. The coffee boiler is on the left side of the machine while standing in front of it (the smaller of the two boilers).

3. Use your 14mm wrench to remove the old temperature probe, and then reinstall the new temp probe.